Утворення конденсату – одна з найпоширеніших проблем будівель, побудованих з використанням тонколистової сталі. Через високу теплоємність металу, він нагрівається і охолоджується значно швидше, ніж повітря, тому коли температура і вологість повітря всередині приміщення досягають точки роси – водяна пара з повітря конденсується на внутрішній поверхні неізольованого металевого даху. Краплі вологи, що капають з дахів складських, виробничих чи сільськогосподарських споруд можуть пошкодити матеріальні цінності, скоротити термін експлуатації покрівлі чи створити несприятливі умови для комфортного перебування всередині приміщення.
Антиконденсатне покриття DRIPSTOP – сучасне рішення, що дозволить вирішити проблеми, пов’язані з утворенням конденсату. Це самоклеюче текстильне покриття з синтетичних волокон, що наноситься на внутрішню поверхню покрівельного профнастилу під час профілювання. Структура покриття дозволяє ефективно збирати та утримувати, а при підвищенні температури – випаровувати, до 1л/м2 вологи.
Покриття DRIPSTOP може наноситися на всі форми покрівельного профнастилу, не містить шкідливих речовин і є безпечним для використання практично у будь-яких приміщеннях, де є проблема утворення конденсату.
Термін служби антиконденсатного покриття DRIPSTOP більше 15 років при температурі повітря від -45 °С до +80 °С.
Клейова основа покриття DRIPSTOP забезпечує додатковий захист металу від корозії, спричиненої дією води або агресивних хімічних сполук, які можуть бути присутні в повітрі промислових чи сільськогосподарських споруд.
Застосування профнастилу з антиконденсатним покриттям DRIPSTOP для будівництва дахів дозволяє відмовитися від використання гідроізоляційних плівок та монтажу додаткових дерев’яних обрешіток.
Покриття належить до малогорючих матеріалів і може використовуватись для покрівлі будівель будь-якого функціонального призначення. Крім того, DRIPSTOP забезпечує додаткову шумоізоляцію приміщення: знижує рівень шуму від дощу на 2 дБ.
Покриття DRIPSTOP стійке до розмноження у ньому бактерій та легко очищається від бруду за допомогою апаратів для миття під тиском.
Технічні характеристики:
ХАРАКТЕРИСТИКА | ВЕЛИЧИНА | СТАНДАРТ |
Вага покриття | 110 г/м2 ±10% | EN 29073-1 |
Товщина покриття | <1 мм | EN ISO 9073-2 |
Абсорбція води при куті нахилу даху: 0° 45° 90° | min 1000 г/м2 min 800 г/м2 min 600 г/м2 | FILK INT.19 |
Абсорбція води при куті нахилу даху: 0° 45° 90° | 11,44 г/100см2 10,42 г/100см2 9,48 г/100см2 | DIN 53923 |
Абсорбція води | min 750 г/м2 | NF P 15-203-1 |
Горючість | А2-s1, d0 | EN 13501-1 |
Міцність на розрив | min 10 Н/25мм | FILK INT.29 |
Поглинання звуку при: 125 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz | 0,02 0,04 0,04 0,12 0,42 | EN ISO 20354 |
Теплопровідність | 0,038 Вт/мК | DIN 52612 |
Стійкість до розмноження бактерій | Індекс 0 – розвиток мікроогранізмів при 50-тикратному збільшенні не спостерігається | DIN EN 14119:2003-12 |
Важливо!
Для належного функціонування мембрани DRIPSTOP необхідна наявність системи вентиляції повітря, що забезпечить приплив повітря з вулиці та виведення тепла та вологи у найвищій точці даху.
Для попередження ефекту капілярності, мембрану не наклеюють на місця перекривання листів покрівельного матеріалу.
Шановні партнери та покупці,
Презентуємо Вам метал з матовим покриттям – розробленим спеціально для покрівель – Granite® Ultramat, виробництва ArcelorMittal, Німеччина.
Deep mat | Ultramat | |
Товщина покриття | 35 мкм | 35 мкм |
Вміст цинку | 225 гр/м2 | 275 гр/м2 |
Корозійна стійкість | RC3 | RC4 |
Стійкість до ультрафіолету | RUV3 | RUV4 |
Стійкість до розтріскування (Т-згин) при 10°С | не гарантовано | ≤2Т |
Стійкість до розтріскування (Т-згин) через 60 діб при 15°С | не гарантовано | ≤2Т |
Гарантія | 10 років | 20 років |
RAL 3005 | RAL 6020 | RAL 7016 | RAL 7024 |
RAL 8004 | RAL 8017 | RAL 8019 | RAL 9005 |
ШАНОВНІ ПОКУПЦІ ТА ПАРТНЕРИ!
З 11 травня 2020 року офіс ТОВ «БУДСЕРВІС ІВАНО-ФРАНКІВСЬК» повертається до звичного режиму роботи.
Беручи до уваги нестабільну епідеміологічну ситуацію та рекомендації МОЗ України щодо попередження поширення Covid-19, відвідування офісу можливе лише з дотриманням запобіжних заходів:
Задля безпеки працівників та відвідувачів вжито таких заходів:
Бережіть себе та будьте здорові!
The new “order status check” feature on our site allows you to check the order status . All you need is your order number and Internet access.
just follow the link: https://budservis.ua/perevirka-statusu-zamovlennia/
or select “check order status” in the company menu, enter your order number and click “check”
This service is available for order numbers beginning with “ІФ” and “НЯ”.
On January 1, 2019, the new DSTU 8802: 2018 Standard “Sheet Steel Products with Protective Coating for Construction” came into force. General Specifications ”. Sheet steel products include metal tile, corrugated board, interior wall cassettes, and seam roofing.
DSTU 8802: 2018 sets requirements for the thickness of the rolled steel, the characteristics of the coating and the geometric accuracy; contains requirements for the labeling and packaging of products and regulates compliance with fire requirements. This standard was adopted to protect the interests of consumers and reduce the quantity of low quality raw materials and products on the Ukrainian market.
According to the basic requirements of the new standard, the minimum thickness of rolled steel used for the manufacture of facade and roofing materials is not less than 0.45 mm (including all protective layers), the thickness tolerance is not more than 0.03 mm.
The thickness of the protective coating for external use is 25 μm (polyester) and 35 μm (matte polyester). The minimum grade of metal protective coating for rolled steel is Z140 (with a 10-year warranty from the roll supplier), recommended – Z225. The thickness of the protective coating for internal use, in the presence of organic coating – 15 microns, the minimum grade of zinc – Z100.
The quality of the products of LLC Budservis Ivano-Frankivsk confirms DSTU 8802: 2018 certification.
Great news: the range of metals and coatings has been expanded by a batch of new coarse-grained matte metal from thyssenkrupp – Pladur ® Wrinkle Mat. 25 year warranty on metal!
The anti-corrosion protection of steel provides an innovative ZM-Eco Protect zinc-magnesium coating (ZM 130 g / m²). The 35-μm multilayer paint coating provides additional protection and provides a structured surface so that the color intensity does not change regardless of the viewing angle. The back of the metal is covered with a 10 μm protective lacquer.
ZM Eco Protect® is a special Zinc-Magnesium (ZM) anti-corrosion coating that provides twice as effective corrosion protection as traditional Zinc (Z) coatings. Tests have shown that a ZM coating of 130 g / m² provides the same level of corrosion protection (and even higher) as Z 275 g / m² at twice the thickness of the coating.
Pladur ® Wrinkle Mat is available in 4 colors:
Ral 7024 | Ral 8017 |
Ral 8019 | Ral 9005 |
Warehouses of LLC Budservis replenished with a new batch of metal with Printech decorative coating, which looks like natural wood and stone. Printech is a popular material for facade decoration using a metal block house or profiled sheet. They make a metal fence and fencing from corrugated board, which most closely resemble a traditional wooden fence.
Printech is available for order in the following colors:
From 19 to 22 March, the most prestigious event of the Ukrainian construction industry took place at the location of the International Exhibition Center in Kiev – the international exhibition InterBuildExpo 2019.
InterBuildExpo – the main professional event in the field of construction and architecture, arrangement
housing, design and repair, as well as being the only multi-vector site for
discussion of the most urgent issues of construction business in Ukraine. At the
exhibition
determines industry trends and development vectors throughout the year.
Over 30,000 people from 13 countries visited the exhibition in 4 days.
LLC Budservis IF is a regular participant of the exhibition. This year, at our stand, besides the already known products, all the new products were presented: forms of metal tile: “Madera”, “Venus”, “Modern”, and “Sorento”; Blockhouse; T57.
The exhibition gave an opportunity to meet our regular clients, partners and friends, make new professional acquaintances and discuss details of cooperation.
We are delighted to be a part of InterBuildExpo 2019, as it is an opportunity to keep up with the pulse of current building trends to assure you of a quality product.