The Era metal tile is made of high quality metal with high rigidity. This increases the roof’s protection against wind, snow and temperature loads. It has a unique shape: five lower waves and six vertices. This shape allows you to perfectly adjust the letters to each other without cracks and gaps. Sheet editing: left to right and right to left.
 |  |
 |  |
Main Benefits
- covering wooden and stone houses;
- corrosion resistance;
- simple repair of the roof, if necessary, the damaged sheet of material is not difficult to replace;
- perfectly preserves color throughout its life;
- environmentally friendly;
- resistant to ignition;
- roofing performance will remain unchanged in the temperature range: +120 to -50 ° C;
- weather resistance.
The steel sheets are covered with a layer of zinc and then passivated and ground. Steel can have both a normal zinc coating and an additional layer of polymer protection, which gives the sheet corrosion resistance and prevents discoloration. The coating can be applied to one or both sides.
Dimensions and Features
| Total width of the sheet | 1210 mm |
| Useful leaf width | 1150 mm |
| Wave Module | 350mm |
| Wave Height | 20mm |
| Stamping Height | 15/25/30 mm |
| Metal Thickness | 0.45 – 0.55 mm |
| Minimum Length | 500mm |
| Maximum Length | 5875/5975 mm |
| Minimum Roof Angle | 14 ° |
Cover Colors
| Polyester | |||
|---|---|---|---|
 Ral1015 |  Ral3005 |  Ral5010 |  Ral6005 |
 Ral8017 |  Ral9003 |  Ral9006 | |
| Matte polyester | |||
Ral3005 |  Ral3009 |  Ral3011 | Ral6005 |
 Ral6020 |  Ral7016 |  Ral7024 |  Ral8004 |
Ral8017 |  Ral8019 |  Ral9005 | |
| Pladur® Wrinke Mat | |||
Ral7024 | Ral8017 | Ral8019 | Ral9005 |
| Pladur® Relief Icecrystal | |||
 Ral7016 |  Ral7024 |  Ral8019 |  Ral9005 |
| Arcoated™ Mat 3D | |||
 Ral3005 |  Ral6020 |  Ral7016 |  Ral7024 |
 Ral8004 |  Ral8017 |  Ral8019 |  Ral9005 |