Panel roof tile Era is made of high quality metal with high rigidity. This increases the roof’s protection against wind, snow and temperature loads. It has a unique shape: five lower waves and six vertices. This allows you to perfectly adjust the letters to each other without cracks or gaps. Sheet editing: left to right and right to left.
Panel roof tile Era
Panel roof is an innovative development in the production of roofing materials. Externally, it is a small sheet of steel, so that the amount of waste in its installation is minimal, which is a significant advantage of modular metal. Also, Panel roof tiles are easy to install on different roof structures.
The leading edge of the Panel roof sheet has a special bend that increases its durability and provides adequate resistance to the adverse effects of precipitation and meteorological factors. The elements of the modules of such metal tile give the roof a seamless appearance, which makes the interior of the house even more beautiful.
- covering wooden and stone houses;
- corrosion resistance;
- simple repair of the roof, if necessary, the damaged sheet of material is not difficult to replace;
- perfectly preserves color throughout its life;
- environmentally friendly;
- resistant to ignition;
- roofing performance will remain unchanged in the temperature range: +120 to -50 ° C;
- weather resistance.
The steel sheets are covered with a layer of zinc and then passivated and ground. Steel can have both a normal zinc coating and an additional layer of polymer protection, which gives the sheet corrosion resistance and prevents discoloration. The coating can be applied to one or both sides.
Dimensions and Features
|Total width of the sheet||1210 mm|
|Useful leaf width||1150 mm|
|Metal Thickness||0.45 – 0.55 mm|
|Length of one tile||398 mm|
|Length of two tiles||748 mm|
|Minimum Roof Angle||14 °|
|Pladur® Wrinke Mat|
|Pladur® Relief Icecrystal|
|Arcoated™ Mat 3D|