Panel roof tile Venera with unique high and smooth waves will make your roof exclusive and original. It has an aesthetic appearance, easy to operate and install. Possibilities of application of the material: from covering of new residential buildings to reconstructions of historical buildings.
Panel roof tile Venera
Panel roof tile is an innovative development in the production of roofing materials. Externally, it is a small sheet of steel, so that the amount of waste in its installation is minimal, which is a significant advantage of modular metal. Also, Panel roof tiles are easy to install on different roof structures.
The leading edge of Panel roof tile sheet has a special bend that increases its durability and provides adequate resistance to the adverse effects of precipitation and meteorological factors. The elements of the modules of such metal tile give the roof a seamless appearance, which makes the interior of the house even more beautiful.
- covering wooden and stone houses;
- corrosion resistance;
- simple repair of the roof, if necessary, the damaged sheet of material is not difficult to replace;
- perfectly preserves color throughout its life;
- environmentally friendly;
- resistant to ignition;
- roofing performance will remain unchanged in the temperature range: +120 to -50 ° C;
- weather resistance.
The steel sheets are covered with a layer of zinc and then passivated and ground. Steel can have both a normal zinc coating and an additional layer of polymer protection, which gives the sheet corrosion resistance and prevents discoloration. The coating can be applied to one or both sides.
Dimensions and Features
|Total width of the sheet||1190 mm|
|Useful leaf width||1090 mm|
|Metal Thickness||0.45 – 0.55 mm|
|Length of one tile||395mm|
|Length of two tiles||745 mm|
|Minimum Roof Angle||14 °|
|Pladur® Wrinke Mat|
|Pladur® Relief Icecrystal|
|Arcoated™ Mat 3D|